JIS STB Type G Test Blocks The G-type Standard Test Blocks (STB) are a series of test blocks containing flat-bottom holes and are used in straight beam (normal) testing. They are used to adjust the working sensitivity, to... Details
JIS STB-A2 Test Block Standard Test Block (STB) Type A2 is used for adjusting the working sensitivity and for the measurement of overall performance characteristics of test equipment. STB types A21 (Fig. 5) and A22 (Fig... Details
JIS STB-A3 Test Block Standard Test Block (STB) Type A3 is used for adjusting the working sensitivity and test range, and for the measurement of refraction angle and probe index of angle beam transducers. STB types A31... Details
Ketos Ring (AS5282 Ring), O-1 Tool Steel The Ketos Ring is used to check overall performance of the magnetic particle examination system. The Ketos Ring is 5 in diameter and 0.875 thick, with a 1¼ diameter center hole. The block... Details
Liquid Penetrant Welded Plate Test Prop Popular Navy LP prop consisting of a stainless steel plate with (3) welds. Both the plate material and weld filler material are 300 series stainless steel. One weld is 1/32 reinforcement and is... Details
Magna-Thin Step Block Special 5-step block for thickness and linearity calibration of thin materials. Note: 1018 Steel Version is Nickel-plated 7075-T6 Aluminum Version is soft anodized, dyed black Inch Step... Available In: Inch, Metric Details
MIL-STD-271F Magnetic Particle Test Plate The MIL-STD-271F Magnetic Particle Test Plate contains (2) EDM notches at 0.020 deep x 0.006 wide x 0.063 long. Material is 3/8 thick low alloy steel x 6 wide x 12 long. Notches are filled flush with... Details
Mini Angle Beam This miniature angle beam block is also known as a Rompas block or simply Angle Beam, and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and... Available In: Inch, Metric Details
Mini PACS® Block Mini PACS® Block is a smaller, portable version of the original PACS® Block. Inch The block includes a total of four holes at 3/64 diameter drilled through the 1.000 width, located at 0.200,... Available In: Inch Details
Mini Resolution Block Used for checking resolution capabilities and calibrating high resolution test equipment. Inch Contains four 0.188 wide x 0.625 long milled slots to simulate flat plate reflectors at metal travel... Available In: Inch Details
N-625 Reference Plate ***LIMITED QUANTITY IN STOCK - DUE TO LOW DEMAND THROUGHOUT THE YEARS, ONCE STOCK RUNS OUT, WE WILL BE DISCONTINUING THIS PRODUCT*** Used for longitudinal, shear, and surface wave sensitivity... Available In: Inch Details
Navships Test Block Used for distance amplitude correction, sensitivity levels and flaw depth information. Inch Contains six 3/64 diameter side-drilled through-holes at distances of 0.25 to 2.75 in 0.25 increments. MTDs... Available In: Inch, Metric Details
Navships Test Block - Navy Version (3020) Used for distance amplitude correction, sensitivity levels and flaw depth information. Contains six 3/64 diameter side-drilled through-holes at distances of 0.250 to 2.750 in 0.250 increments, and an... Details
Navy Eddy Current Standard Navy Universal Eddy Current Standard. A (3) plate assembly containing (20) fastener holes with a total of (71) EDM notches in various locations. Overall Dimensions: 0.875 thick x 4.0 wide x 7.0 long... Details
NSTR-99 LP Personnel Qualification Test Props These liquid penetrant test props usually contain at least (4) micro-holes 0.004 to 0.005 in diameter by 0.008 to 0.010 deep. Holes can be machined in welded plate, pipe, bolts, bevel canopies,... Details
PACS® Block Phased Array Calibration Standard (PACS®) used for angle beam verification, probe angle exit point, calibration for wedge delay, sensitivity, DAC/TCG for thicknesses up to 2. Inch The three radii... Available In: Inch, Metric Details
PACS® Block, AWS Version (0.060 Holes) Special Version of the Phased Array Calibration Standard (PACS®) with 0.060 diameter Side-drilled Holes for use with AWS requirements. Block is used for angle beam verification, probe angle exit... Available In: Inch Details
PACS® Notch Block The PACS® Notch Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks. The block contains four EDM slots at depths of 20, 40, 60,... Available In: Inch Details
PAUT IIW Block, ISO 19675 The long-awaited PAUT IIW Block from ISO 19675 is now official. Get yours today! Metric PH Tool is proud to be the first US-based manufacturer to offer the PAUT IIW Block to the NDT market,... Available In: Metric Details
PAUT Radius Calibration Block **NOTE: By default, this block has a flat scanning surface, but it can be curved to match a pipe size for axial scanning upon request. Image shows 2" NPS as an example.** The Phased Array... Details
PH Tool ASME-Style Pipe Calibration Block (PAUT) These pipe calibration blocks are specially-designed to facilitate phased array UT (PAUT). The PH Tool block design includes various modifications to the original ASME design, including extra axial... Details
Phased Array Cal Block No. 2 (0.75-in. Thick) This new Phased Array calibration block designed by PH Tool contains all of the required features on the ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block... Details
Phased Array Cal Block No. 2 (1.5-in. Thick) This new Phased Array calibration block designed by PH Tool contains all of the required features on the ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block... Details
Phased Array Navships Test Block This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another. The block contains four holes at 3/64 diameter drilled through the 1... Available In: Inch, Metric Details
Phased Array Type A Block The Phased Array “Type A” Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle... Available In: Inch, Metric Details
Pipe Calibration Block (Conventional UT) PH Tool manufactures hundreds of these ASME Angle Beam Blocks every year. A calibration block should be a section of pipe of the same nominal size, schedule, heat treatment, and material... Details
SC Block AWS-type block used for shear wave sensitivity calibration. Contains two 0.062 diameter through holes. In accordance with ASTM E164 and BRR/AWS requirements. Inch • Dimensions: 3.000 x 1.250 x 0... Available In: Inch, Metric Details
Special Purpose Magnetic Particle Standards These standards will typically contain EDM notches of varying degree and severity to provide an indication of the effectiveness of the dry or wet magnetic particle examination process. Notches are... Details
Tech Scales (Pack of 5) You've seen them at our booth at trade shows over the years, now our handy NDT Technician scales are available for sale in packages of five scales. Made of sturdy, anodized aluminum, these great... Details
Tech Scales, Custom Order (250 to 1000) [TECHSCALE.CUSTOM] You've seen them at our booth at trade shows over the years, now our handy NDT Technician scales are available for sale in custom orders of 250+. Made of sturdy, anodized aluminum, these great little... Details
Thin 10-Step Block, Inch (0.050-0.500) Note: 1018 Steel Version is Nickel-plated 7075-T6 Aluminum Version is soft anodized, clear Special step block for thickness and linearity calibration. The Thin 10-Step inch version is... Available In: Inch Details
Thin 10-Step Block, Metric (1-10mm) Note: 1018 Steel Version is Nickel-plated 7075-T6 Aluminum Version is soft anodized, clear Special step block for thickness and linearity calibration. The Thin 10-Step metric version is... Available In: Metric Details
Thin Step Block Special step block for thickness and linearity calibration of thin materials. This block comes in thicknesses of 0.040, 0.060, 0.080 and 0.100. Step face measures 0.750 x 0.750. Manufactured in... Available In: Inch, Metric Details
Ultra Thin Step Block EXTREMELY Thin 5-step block for thickness and linearity calibration. Note: 1018 Steel Version is Nickel-plated 7075-T6 Aluminum Version is soft anodized, dyed black Inch Step... Details
USAF General Purpose Eddy Current Standard U.S. Air Force General Purpose Eddy Current Standard. A (3) plate assembly containing (20) fastener holes with a total of (66) EDM notches in various locations. Overall Dimensions: 1.06 thick x 4.0... Details
V1/5 (A2) Calibration Block Note: In 2018, PH Tool stopped including the Ø2 (50mm) acrylic plug in this product. Plugs will be available upon special request only, and will add cost. This non-essential feature has... Details