ASME Sec V Basic Calibration Block T-434.2.1

  • ASME Basic Cal Block, 1/2", A516-70 Steel

    ASME Basic Cal Block, 1/2", A516-70 Steel

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • ASME Basic Cal Block, 1/2", 7075-T6 Aluminum

    ASME Basic Cal Block, 1/2", 7075-T6 Aluminum

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • ASME Basic Cal Block, 1/2", Type 304 Stainless Steel

    ASME Basic Cal Block, 1/2", Type 304 Stainless Steel

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • Long Version ASME Basic Cal Block, 1/2", A516-70 Steel

    Long Version ASME Basic Cal Block, 1/2", A516-70 Steel

    Special long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes...

  • ASME Basic Cal Block, 3/4", A516-70 Steel

    ASME Basic Cal Block, 3/4", A516-70 Steel

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • ASME Basic Cal Block, 3/4", 7075-T6 Aluminum

    ASME Basic Cal Block, 3/4", 7075-T6 Aluminum

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • ASME Basic Cal Block, 3/4", Type 304 Stainless Steel

    ASME Basic Cal Block, 3/4", Type 304 Stainless Steel

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • ASME Basic Cal Block, 1-1/2", A516-70 Steel

    ASME Basic Cal Block, 1-1/2", A516-70 Steel

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • ASME Basic Cal Block, 1-1/2", 7075-T6 Aluminum

    ASME Basic Cal Block, 1-1/2", 7075-T6 Aluminum

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • ASME Basic Cal Block, 3", A516-70 Steel

    ASME Basic Cal Block, 3", A516-70 Steel

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • ASME Basic Cal Block, 3", 7075-T6 Aluminum

    ASME Basic Cal Block, 3", 7075-T6 Aluminum

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • ASME Basic Cal Block, 3", Type 304 Stainless Steel

    ASME Basic Cal Block, 3", Type 304 Stainless Steel

    Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains...

  • Long Version ASME Basic Cal Block, 3", A516-70 Steel

    Long Version ASME Basic Cal Block, 3", A516-70 Steel

    Special long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes...

  • Long Version ASME Basic Cal Block, 3", 7075-T6 Aluminum

    Long Version ASME Basic Cal Block, 3", 7075-T6 Aluminum

    Special long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes...