Cal Block No. 2 (K2)

  • Calibration Block No. 2, 12.5mm, 1018 Steel

    12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN...

  • Calibration Block No. 2, 12.5mm, 7075-T6 Aluminum

    12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN...

  • Calibration Block No. 2, 12.5mm, Special Alloy

    12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN...

  • Calibration Block No. 2, 25mm, 1018 Steel

    25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963,...

  • Calibration Block No. 2, 25mm, 7075-T6 Aluminum

    25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963,...

  • Calibration Block No. 2, 25mm, Special Alloy

    25.0mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN...

  • Calibration Block No. 2, 25mm, Type 304 Stainless Steel

    25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963,...