5-Step Block

  • 5-Step Block, 1018 Steel

    5-Step Block for thickness and linearity calibration. Inch Alloy: 1018 Steel, Nickel-plated Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above. Metric...

    Available In: Inch, Metric 5A, Metric 5B

  • 5-Step Block, 2024-T3 Aluminum

    5-Step Block for thickness and linearity calibration. Inch Alloy: 2024-T3 Aluminum, anodized Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, 2101 Duplex Stainless Steel

    5-Step Block for thickness and linearity calibration. Inch Alloy: 2101 Duplex Stainless Steel Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, 2205 Duplex Stainless Steel

    5-Step Block for thickness and linearity calibration. Inch Alloy: 2205 Duplex Stainless Steel Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, 4340 Steel

    5-Step Block for thickness and linearity calibration. Inch Alloy: 4340 Steel, Nickel-plated Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, 6061-T6 Aluminum

    5-Step Block for thickness and linearity calibration. Inch Alloy: 6061-T6 Aluminum, anodized Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, 6AL-4V Titanium

    5-Step Block for thickness and linearity calibration. Inch Alloy: 6AL-4V Titanium Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above

    Available In: Inch

  • 5-Step Block, 70/30 Copper Nickel

    5-Step Block for thickness and linearity calibration. Inch Alloy: 70/30 Copper Nickel Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, 7050-T7451 Aluminum

    5-Step Block for thickness and linearity calibration. Inch Alloy: 7050-T7451 Aluminum, anodized Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, 7075-T6 Aluminum

    5-Step Block for thickness and linearity calibration. Inch Alloy: 7075-T6 Aluminum, anodized Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above...

    Available In: Inch, Metric 5A, Metric 5B

  • 5-Step Block, 90/10 Copper Nickel

    5-Step Block for thickness and linearity calibration. Inch Alloy: 90/10 Copper Nickel Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above

    Available In: Inch

  • 5-Step Block, A36 Steel, Nickel-plated

    5-Step Block for thickness and linearity calibration. Inch Alloy: A36 Steel, Nickel-plated Material is ASME P-No. 1 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available....

    Available In: Inch

  • 5-Step Block, A387 Grade 11 (1.25% Cr)

    5-Step Block for thickness and linearity calibration. Inch Alloy: A387 Gr. 11 Steel, bare (1.25% Cr) Material is ASME P-No. 4 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case...

    Available In: Inch

  • 5-Step Block, A387 Grade 22 (2.25% Cr)

    5-Step Block for thickness and linearity calibration. Inch Alloy: A387 Gr. 22 Steel, bare (2.25% Cr) Material is ASME P-No. 5A Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case...

    Available In: Inch

  • 5-Step Block, A387 Grade 5 (5% Cr)

    5-Step Block for thickness and linearity calibration. Inch Alloy: A387 Gr. 5 Steel, bare (5% Cr) Material is ASME P-No. 5B Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case...

    Available In: Inch

  • 5-Step Block, A387 Grade 91 (9% Cr)

    5-Step Block for thickness and linearity calibration. Inch Alloy: A387 Gr. 91 Steel, bare (9% Cr) Material is ASME P-No. 5B Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case...

    Available In: Inch

  • 5-Step Block, A516 Grade 70

    5-Step Block for thickness and linearity calibration. Inch Alloy: A516-70 Steel, bare Material is ASME P-No. 1 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...See...

    Available In: Inch

  • 5-Step Block, AL6XN

    5-Step Block for thickness and linearity calibration. Inch Alloy: AL6XN Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above

    Available In: Inch

  • 5-Step Block, Alloy 20

    5-Step Block for thickness and linearity calibration. Inch Alloy: Alloy 20 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above. 

    Available In: Inch

  • 5-Step Block, Brass

    5-Step Block for thickness and linearity calibration. Inch Alloy: Brass Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, Brass Alloy 932

    5-Step Block for thickness and linearity calibration. Inch Alloy: Brass Alloy 932 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above

    Available In: Inch

  • 5-Step Block, Cast Ductile Iron

    5-Step Block for thickness and linearity calibration. Inch Alloy: Cast Ductile Iron Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above

    Available In: Inch

  • 5-Step Block, Cast Gray Iron

    5-Step Block for thickness and linearity calibration. Inch Alloy: Cast Gray Iron Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above

    Available In: Inch

  • 5-Step Block, Copper 110

    5-Step Block for thickness and linearity calibration. Inch Alloy: Copper 110 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, Hastelloy C-276

    5-Step Block for thickness and linearity calibration. Inch Alloy: Hastelloy C-276 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above

    Available In: Inch

  • 5-Step Block, Incoloy 800

    5-Step Block for thickness and linearity calibration. Inch Alloy: Incoloy (Alloy) 800 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, Inconel 600

    5-Step Block for thickness and linearity calibration. Inch Alloy: Inconel (Alloy) 600 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, Inconel 625

    5-Step Block for thickness and linearity calibration. Inch Alloy: Inconel (Alloy) 625 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, Inconel 718

    5-Step Block for thickness and linearity calibration. Inch Alloy: Inconel (Alloy) 718 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, Monel 400

    5-Step Block for thickness and linearity calibration. Inch Alloy: Monel (Alloy) 400 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above

    Available In: Inch

  • 5-Step Block, Nickel 200

    5-Step Block for thickness and linearity calibration. Inch Alloy: Nickel 200 Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above

    Available In: Inch

  • 5-Step Block, Special Alloy

    5-Step Block for thickness and linearity calibration. Looking for a 5-Step Block made from an exotic alloy? You've come to the right place! If you've looked through our many available alloys, and don't see what you need, please contact us! PH...

    Available In: Inch, Metric 5A, Metric 5B

  • 5-Step Block, Type 304 Stainless Steel

    5-Step Block for thickness and linearity calibration. Inch Alloy: Type 304 Stainless Steel Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above. Metric...

    Available In: Inch, Metric 5A, Metric 5B

  • 5-Step Block, Type 316 Stainless Steel

    5-Step Block for thickness and linearity calibration. Inch Alloy: 1018 Steel, Nickel-plated Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above. Metric...

    Available In: Inch, Metric 5A, Metric 5B

  • 5-Step Block, Type 321 Stainless Steel

    5-Step Block for thickness and linearity calibration. Inch Alloy: Type 321 Stainless Steel Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch

  • 5-Step Block, Type 410 Stainless Steel

    5-Step Block for thickness and linearity calibration. Inch Alloy: Type 410 Stainless Steel Step Thickness: 0.100, 0.200, 0.300, 0.400, and 0.500" Step Face: 3/4" x 3/4" Spec: ASTM E797 Optional Hardwood Case available...see above.

    Available In: Inch