5-Step Blocks

*DEFECTIVE ITEM* 5-Step Block, Inch, 5454 Aluminum Anodized[5.STEP.I.AL.SD]

5-Step Block, Inch 0.100, 0.200, 0.300, 0.400, 0.500" - Alloy: 5454 Aluminum, Anodized - Condition: Dings on both ends of block - Aesthetic defects, does not affect functionality of block

*DEFECTIVE ITEM* 5 Step Block, Inch, 1018 Steel [5STEP.CS.SD.OOT]

5-Step Block, Inch - Alloy: 1018 Steel, Nickel-plated- Steps:0.100,0.200,0.300,0.400,0.500" - Condition: Exceeds ASTM E797 allowable tolerance of ±0.001 on step thickness. Some blocks are laser-engraved, some are machine-engraved.- As an added...

Available In: Inch

*DEFECTIVE ITEM* 5 Step Block, Inch, 1018 Steel, Nickel-Plated [5STEP.CS.SD.asst1]

5-Step Block, Inch Alloy: 1018 Steel, Nickel-Plated Condition: Plating issues: #37364 plating thin at racking hole, #37497 plating thin on side of 0.100 step, #41195 plating finish marked on sides, #41283 bad plating on bottom, #41333 corrosion on...

Available In: Inch

*DEFECTIVE ITEM* 5 Step Block, Inch, 1018 Steel, Nickel-Plated [5STEP.CS.SD.asst2]

5-Step Block, Inch Alloy: 1018 Steel, Nickel-Plated Discount: 20% These blocks have dings on them Serial #37485 nick on steps0.100 &0.500, #39607 ding on corner of0.500 step,#396160.500 step creased edge,#39618 small nicks on0.500 &0.400...

Available In: Inch

*DEFECTIVE ITEM* 5 Step Block, Inch, 1018 Steel, Nickel-Plated [5STEP.CS.SD.asst]

5-Step Block, Inch Alloy: 1018 Steel, Nickel-Plated Condition: Small ding on bottom of blocks: Serial No: 42701, ding on corner bottom back of block, #41392, ding on bottom side of block#41368, nick on bottom 0.500 step, #41384, ding on bottom side,...

Available In: Inch

*DEFECTIVE ITEM* 5 Step Block, Inch, 1018 Steel, Nickel-Plated [5STEP.CS.SD4]

5 Step Block, Inch - Alloy: 1018 Steel, Nickel-Plated- Steps:0.100,0.200,0.300,0.400,0.500- Condition: Laser engraved with customer logo- 10% Discount

Available In: Inch

*DEFECTIVE ITEM* 5 Step Block, Inch, 1018 Steel, Nickel-Plated [5STEP.CS.SD55079]

5-Step Block, Inch Alloy: 1018 Steel, Nickel-Plated Steps:0.100,0.200,0.300,0.400,0.500 Condition: Ding on corner of 0.500 step Discount: 20%

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, 1018 Steel [5STEP.CS.SD2688]

5-Step Block, Inch - Alloy: 1018 Steel, Nickel-plated- Condition: Ding on bottom of 0.500" step of #2688 and ding on0.500 step and ding by racking hole #37303- 20% discount

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, 1018 Steel [5STEP.CS.SD2]

5-Step Block, Inch 0.100,0.200,0.300,0.400,0.500" - Alloy: 1018 Steel, Nickel-plated- Condition: Plating issue in and around step engraving, purely aesthetic- 25% discount- Serial Nos. 2681, 24029

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, 1018 Steel [5STEP.CS.SD42129]

5-Step Block, Inch 0.100,0.200,0.300,0.400,0.500" - Alloy: 1018 Steel, Nickel-plated- Condition: Ding on0.500 step back corner, ding on side, purely aesthetic, does not affect function of block.- 10% discount

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, 1018 Steel, NP [5STEP.ICS.SD.48351]

5-Step Block, Inch - Alloy: 1018 Steel, Nickel-Plated- Condition: Small ding on back corner on0.500 step- 20% discount-Serial Number: 48351

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, 1018 Steel, NP [5STEP.ICS.SD.48371]

5-Step Block, Inch - Alloy: 1018 Steel, Nickel-Plated- Condition: Small mark on bottom of block located by racking hole- Discount: 10%- Serial Number: 48371

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, 1018 Steel, NP [5STEP.ICS.SD]

5-Step Block, Inch - Alloy: 1018 Steel, Nickel-Plated- Discount: 20%- These blocks have small tear in the metal on the block side, Ser No: 44822, 44271, 44156- These blocks have small tear on the step face edge, Ser No: 449890.500 step, 449960.300 &...

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, 70-30 CuNi [5STEP.CuNi.SD2801/2803]

5-Step Block, Inch 0.100,0.200,0.300,0.400,0.500" - Alloy: 70-30 CuNi- Condition: Step 0.100 undersized,0.0985 (avg) as-built, min.0.0990 - max.0.1010- 45% discount

Available In: Inch

*DEFECTIVE ITEM* 5-STEP Block, Inch, 7075 Aluminum anodized [5-Step.IA.SD]

5-Step Block, Inch - Alloy: 7075 Aluminum, Anodized- Condition: Laser error on all blocks- Discount: 20%- Serial Numbers: 14938, 14940, 51124, 51125, 51126, 51127

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, 7075-T6 Aluminum [5STEP.IA.SD.OOT]

5-Step Block, Inch 0.100,0.200,0.300,0.400,0.500" - Alloy: 7075-T6 Aluminum, anodized- Condition: Exceeds the ASTM E797 allowable tolerance of ±0.001" on step thickness. - As an added bonus, our out-of-tolerance step blocks are certified with both...

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, 7075-T6 Aluminum [5STEP.IA.SD2]

5-Step Block, Inch - Alloy: 7075-T6 Aluminum, anodized- Condition: Excessive corner-rounding and edge-rounding, excessive edge breaks, grind marks on step surfaces- 30% discount

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, AL6XN [5STEP.IAL6XN.SD2]

5-Step Block, Inch - Alloy: AL6XN- Condition: 100" step is out of tolerance/parallelism.- As an added bonus, our out-of-tolerance step blocks are certified with both nominal and as-built (actual)

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, AL6XN [5STEP.IAL6XN.SD]

5-Step Block, Inch 0.100,0.200,0.300,0.400,0.500" - Alloy: AL6XN- Condition: Exceeds ASTM E797 allowable tolerance of ±0.001" on step thickness.- 40% discount-As an added bonus, our out-of-tolerance step blocks are certified with both nominal and...

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, Steel, Nickel-Plated [5.STEP.I.SD]

5-Step Block, Inch 0.100,0.200,0.300,0.400,0.500" - Alloy: 1018 Steel, Nickel-Plated- Condition: Minor Flaws in plating, small scratches- Aesthetic defects, does not affect functionality of blocks

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, Tin Babbitt [5STEP.ITB69579.SD]

5-Step Block, Inch - Alloy: Tin Babbitt- Steps:0.100,0.200,0.300,0.400,0.500"- Condition: Step .300 OT .2987, Step .400 OT .3984, Step .500 OT .4988- 40% discount

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, Type 304 Stainless Steel [5-Step.ISS.SD45508]

5-Step Block Inch - Alloy: Type 304 Stainless Steel- Condition: Nick on0.500 step- Discount: 10%- Serial Number: 45508

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, Type 304 Stainless Steel [5STEP.SS.SD.OOT]

5-Step Block, Inch - Material: Type 304 Stainless Steel - Steps:0.100,0.200,0.300,0.400,0.500" - Condition: Exceeds ASTM E797 allowable tolerance of ±0.001" on step thickness. Various scratches, or laser engraved logo as well.- As an added bonus,...

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, Type 316 Stainless Steel [5STEP.I316.SD10]

Step Block, Inch - Alloy : Type 316 Stainless Steel - Steps :0.100,0.200,0.300,0.400,0.500" - Condition : Exceeds ASTM E797 allowable tolerance of ±0.001" on step thickness.- As an added bonus, our out-of-tolerance step blocks are certified with...

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, Type 904L Stainless Steel [5STEP.I904L.SD]

5-Step Block, Inch - Alloy: Type 904L Stainless Steel- Steps:0.100,0.200,0.300,0.400,0.500"- Condition: Mark on0.500 step, wire EDM cut off issue- 30% discount

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Inch, ZK60A-T5 Magnesium [5STEP.IMAG.SD56064]

 5-Step Block, Inch 0.100,0.200,0.300,0.400,0.0500) - Alloy: ZK60A-T5 Magnesium- Condition: Step0.500 out of tolerance0.4985- Discount: 40%- Serial No: 56064

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Metric 5A, 1018 Steel [5STEPM5A.CS.SD.OOT]

5-Step Block, Metric 5A (2.5, 5.0, 7.5, 10.0, 12.5 mm) - Alloy: 1018 Steel, Nickel-plated- Condition: Exceeds ASTM E797 allowable tolerance of ±0.02 mm on step thickness. - As an added bonus, our out-of-tolerance step blocks are certified with...

Available In: Metric 5A

*DEFECTIVE ITEM* 5-Step Block, Metric 5A, 1018 Steel, Nickel-Plated [5-STEP.M5A.CS.SD35702]

5-Step Block, Metric 5A - Alloy: 1018 Steel, Nickel-Plated- Condition: Small dent on 12.5 step.- Discount: 20%- Serial Number: 35702

Available In: Metric 5A

*DEFECTIVE ITEM* 5-STEP Block, Metric 5A, 7075 Aluminum anodized [5-Step.MA.ASD]

5-Step Block, Metric - Alloy: 7075 Aluminum, Anodized- Condition: Laser error on both blocks- Discount: 20%- Serial Numbers: 11461, 11462

Available In: Inch

*DEFECTIVE ITEM* 5-Step Block, Metric 5A, Alloy 600 [5STEPM5A.600.SD]

5-Step Block, Metric 5A (2.5, 5.0, 7.5, 10.0, 125mm) Alloy 600Condition: Tears on bottom of block20% DiscountSerial Number: 52903

Available In: Metric 5A

*DEFECTIVE ITEM* 5-Step Block, Metric 5A, Type 304 Stainless Steel [5STEPM5A.SS.SD]

5-Step Block, Metric 5A (2.5, 5.0, 7.5, 10.0, 12.5 mm) - Alloy: Type 304 Stainless Steel- Condition: Grinding Mishap on 10.0mm Step- 20% Discount- Serial No. 33773

Available In: Metric 5A

*DEFECTIVE ITEM* 5-Step Block, Metric 5B, 1018 Steel [5STEPM5B.CS.SD]

5-Step Block, Metric 5B - Alloy: 1018 Steel, Nickel-plated- Steps: 2, 4, 6, 8, 10 mm- Condition: Exceeds ASTM E797 allowable tolerance of ±0.02 mm on step thickness.- As an added bonus, our out-of-tolerance step blocks are certified with both...

Available In: Metric 5B

*DEFECTIVE ITEM* 5-Step Block, Metric 5B, Type 316 Stainless Steel [5STEPB.M316.SD]

5-Step Block, Metric 5B - Alloy : Type 316 Stainless Steel- Steps : 2, 4, 6, 8, 10 mm- Condition : Exceeds ASTM E797 allowable tolerance of ±0.02 mm on step thickness. 2.0 mm step is undersized

Available In: Metric 5B