ASTM E2491 PA Assessment Block (a.k.a. Type B), Special Alloy

Availability:
In Stock
Bulk Pricing:
Buy in bulk and save
Certification Report:
Included ?

Description

Inch

The PH Tool ASTM E2491 Phased Array Assessment Block is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC curves, and evaluate linear/angular resolution, focusing ability and beam steering capability. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonics capabilities. This block is also referred to as a “Type B” block.
    • Dimensions: 1" thick x 4" wide x 6" long
    • In accordance with ASTM E2491 and PH Tool Drawing No. 10235.

  • Alloy: PH Tool specializes in custom blocks, and all of our test blocks are available in special and exotic alloys. Please contact us for a quote. We can machine blocks in Titanium alloys, Inconels and other Nickel alloys, Alloy Steels, Stainless Steels, Aluminums, Copper-Nickels, Brasses, Cast Irons, refractory alloys such as Molybdenum and Tungsten, and many more. Let us build your next special alloy test block!
Block features:
  • Four (4) angled holes (30°, 45°, 60°, 75°) at 1/16" 0.0625) diameter
  • Array of 18 holes on 1" radius at 0.040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
  • Array of 18 holes on 2" radius at 5/64" 0.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
  • Vertical column of 16 holes at 0.040" diameter with 0.120" of separation between holes.
  • Angled row of 12 holes at 1/16" 0.0625) diameter with 0.200" of separation between holes.
  • Machine-engraved tick mark at radii centerline
  • Machine-engraved block description, alloy, and unique serial no.

Metric

The PH Tool ASTM E2491 Phased Array Assessment Block is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC curves, and evaluate linear/angular resolution, focusing ability and beam steering capability. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonics capabilities. This block is also referred to as a “Type B” block.
  • Dimensions: 150mm x 100mm x 25mm
  • In accordance with ASTM E2491 and PH Tool Drawing No. 10208.
  • Alloy: PH Tool specializes in custom blocks, and all of our test blocks are available in special and exotic alloys. Please contact us for a quote. We can machine blocks in Titanium alloys, Inconels and other Nickel alloys, Alloy Steels, Stainless Steels, Aluminums, Copper-Nickels, Brasses, Cast Irons, refractory alloys such as Molybdenum and Tungsten, and many more. Let us build your next special alloy test block!
Block features:
  • Four (4) angled holes (30°, 45°, 60°, 75°) at 1.5mm diameter
  • Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
  • Array of 18 holes on 50mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
  • Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between holes.
  • Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes.
  • Machine-engraved tick mark at radii centerline
  • Machine-engraved block description, alloy, and unique serial no.